laf0rge

Pop	19.18
Vit	64.73

Normally, only one process at a time can use the QUEUE target provided by netfilter, the Linux 2.4 firewalling subsystem. ipqmpd solves this problem by acting as a multiplexer between the QUEUE target and multiple processes. The package includes a compatibility library (libipqmpd) which makes porting from the netfilter-provided libipq easy.

Pop	12.41
Vit	44.30

libmrtd is a library to read and verify information contained in electronic Passports compliant with the ICAO (International Civil Aviation Organization) MRTD (Machine Readable Travel Document) specification. This basically includes all RFID and biometrically enhanced passports issued worldwide.

Pop	64.16
Vit	3.82

libnfnetlink is a low-level userspace library for nfnetlink-based communication between the kernel-side netfilter and the user-space world. It is therefore the fundamental layer for all other nfnetlink-enabled user-space programs interfacing with the netfilter subsystem of the Linux kernel.

Pop	18.71
Vit	44.30

librfid is a RFID protocol stack for RFID readers. It implements the reader side of ISO 14443 A and B, ISO 15693, Philips Mifare Ultralight, and Classic. It currently supprorts the Omnikey Cardman 5121 and OpenPCD RFID readers. Support for Philips Pegoda is currently under development. librfid uses libusb and should work on all operating systems that support libusb. Only Linux has been tested.

Pop	32.95
Vit	24.77

OpenBSC implements the minimal necessary parts for operating your own GSM network, i.e. BSC, MSC, HLR, AuC, and SMSC. Using one or more base transceiver stations, it supports circuit-switched voice calls, SMS, mobility management, and in-call hand-over.

Pop	24.56
Vit	5.71

OpenGGSN (Gateway GPRS Support Node) is an element in the GPRS/EDGE/UMTS/WCDMA core network. It terminates the tunnels between mobile phones and the external IP network, typically the Internet.

Pop	34.12
Vit	1.00

OpenPCD is a free and open RFID reader reference design platform. The OpenPCD firmware is software that runs in OpenPCD's AT91SAM7 ARM controller, and connects the RFID reader hardware (CL RC632 ASIC) with the Host PC via USB. The Firmware includes a custom USB device stack and drivers for the various embedded AT91SAM7 components. The firmware itself does not run on Linux, but it only works with a Linux host PC talking to it.

Pop	21.54
Vit	24.79

OsmocomBB provides a full-featured GSM protocol stack implementation together with other parts of a GSM baseband processor firmware such as hardware drivers and an actual feature-phone UI.

Pop	25.10
Vit	5.80

OsmoSGSN (Serving GPRS Support Node) is the central core network node of a GPRS/EDGE/UMTS cellular network. It is an experimental SGSN implementation, exposing a Gb interface (NS/BSSGP) towards the BSS and the GTP protocol towards the GGSN. It is not yet ready for production use, but primarily for laboratory and research use.

Pop	24.33
Vit	5.71

SIMtrace sniffs communication between a mobile phone and a SIM/USIM card. This can be useful for research and analysis, and for developing mobile phone and SIM toolkit (STK) software. The SIMtrace hardware is also capable of MITM (man in the middle) attacks on the SIM-MS communication.