Re: Help Please
You need to follow the instructions in the article exactly, if you want to use the IP addresses you are showing for the DSL modem and the PC... i.e. your brindge will NOT have ip addresses assigned to either interface.
> Thanks for a great article.
> I'm trying to setup squid at my home
> with 2 lan PC's connecting with DSL to
> the i-net.
> Questions: Does my squid box need 2
> network cards?
> Should the setup be like this?
> ~(inet ip) DSL Router ~
> ~ (10.0.0.2)~
> ~(eth0 10.0.0.3)~
> ~ squid ~
> ~(eth1 10.0.0.4)~
> ~ eth Switch
> ~ 10.0.0.x
> LAN Clients
Re: can ping from bridge , hows that ???
If you have IP Addresses assigned to either (or both) of the eth interfaces, you will be able to ping from the bridge.
> Bridge shouldn't be able to ping and
> But mine does. I configured a
> transparent squid bridge in my FC3 linux
> box. And the box is supposed to not able
> to ping or shouldn't be visible to
> others. But i can browse the internet
> and ping as well. Actually i have
> following setup :
> Gw <---> linux squid
> bridge <----> clients
> (b/w control)
> Before i put the bridge in the middle
> the bandwidth controlling was great but
> after i put the bridge, the
> the bw control in not good and all the
> traffic seems to come from the bridge as
> if the nating has been done on the
> Please help whats the problem