Video problem with 2.0 and 2.1
When Hubert moved up to version 2.0, the way that video was modified. I have a system with built-in i810 video controller, but also an old ATI AIW PCI card which I use for video.
Versions prior to 2.0 never had a problem detecting and using the ATI card, but the newer version goes to a black screen and freezes.
In order to back the system up, I must set BIOS to use the built-in video only, and move the monitor cable to the motherboard video port.
This was never an issue with versions prior to 2.0.
I currently have a Fedora3 box running the above three products as a Dansguardian Bridge. Since bridging is part of the 2.6 kernel build, it was the easiest to include, and I am currently running with all tables open with:
eth0 Outer subnetwork
eth1 Inner subnetwork
I then added Squid, and configured it to run as a transparent proxy. The trick here is that I only want the bridge services to be visible to the inner subnet, not to everyone. Based on the sparse documentation that I have been able to find, I assume that I can force Brouting of IPv4 traffic, and use Iptables to do blocking of requests to upstream nodes. The ultimate goal is to add Dansguardian, plus a tight set of iptables rules using the physdev option to create a mostly invisible Bridge Filter that services IP to the inner subnet without hindering the flow of other protocols. If anyone has seen ebtables used like this before I could use a link, because I have found zero articles so far.