qpimd aims to implement a PIM (Protocol Independent Multicast) daemon for the Quagga Routing Suite. Initially, it targets only PIM SSM (Source-Specific Multicast) mode as defined in section 4.8.2 (PIM-SSM-Only Routers) of RFC 4601. In order to deliver end-to-end multicast routing control plane, qpimd includes the router-side of IGMPv3 (RFC 3376).
libdrizzle is the client and protocol library for the Drizzle project. The drizzled server will use this as the protocol library, as will the client utilities and any new projects that require low-level protocol communication (like proxies). It is designed to be used for other language interfaces such as PHP extensions and with SWIG.
drizzle-php-ext is a PHP front end for the Drizzle client and protocol library (libdrizzle). It aims to provide a simple interface closely tied to the C library by minimizing interface changes, avoiding duplicate code, and not introducing any new functionality that is not PHP specific.
iLAP (Laboratory data management, Analysis, and Protocol development) is a workflow-driven information management system specifically designed to create and manage experimental protocols and to analyze and share laboratory data. The system combines experimental protocol development, wizard-based data acquisition, and high-throughput data analysis into a single, integrated system.
librouteros is a library that can be used to communicate with devices running RouterOS, a Linux-based operating system by MikroTik. A generic and low-level interface is provided to issue arbitrary commands to the device and receive replies. For some commands, high-level abstractions are provided to simplify communication. The library is thread-safe and reentrant-safe.
Pkviz is a tool for plotting and cycling through and animating a series of network packets captured by tcpdump. What makes it unique is that the packets’ structure is visualized, not any labels and not time itself. Pkviz takes each byte in a packet and plots it out end-to-end, left-to-right, from the first byte to the last. How high the dot gets plotted depends on the value of the byte: bytes with a value of 0 are at the bottom and those which are 255 (0xff) – the maximum value of a byte – get plotted at the top. This might not be interesting for one packet, but that changes when you start looking at thousands of packets. Pkviz can cycle through thousands of packets in the set so you can see what happened on the wire.
chan-sccp-b is an extension of the original chan-sccp implementation for the Asterisk soft-PBX. It lets you hook up a Cisco/SCCP Phone to your Asterisk server using the SCCP protocol, which works a lot better than the SIP firmware on the same phone. It provides full phone functionality instead of just a simple SIP channel provider. It offers functionality like shared lines, hotline functionality, guest login, dynamic speeddials, private line automatic ring-down (PLAR), personal softkey configurations, Dundi support, SCCP extended dialplan functions, manager support, and custom device state buttons.
The ROHC library provides an easy and robust way for applications to reduce their bandwidth usage on network links with limited capacity or expensive costs. Headers of network packets are compressed with the ROHC protocol and algorithms. The ROHC protocol is very efficient for compressing VoIP streams which use RTP as a transport protocol. ROHC is also suitable for compressing IP-only (IPv4 or IPv6) flows, UDP flows, and many others.
GridPort is a simple and robust open standard for portlets based on HTTP. It aims to be a simple, scalable distributed composition independent of implementation technology. Transparent collaboration and an SOA paradigm from both interface and data perspectives are encouraged. Component types include portal, proxy for asynchronous multi-casting, and portlets. The purpose of this project is to develop mainly the specification alongside a prototype to enable development of these components in any programming environment and operating platform, which is why its central protocol is HTTP 1.1.