RSS 35 projects tagged "Power (UPS)"

Download Website Updated 14 Feb 2011 asapm

Pop 66.09
Vit 5.70

asapm is an AfterStep look & feel Advanced Power Management (APM) monitor for laptop and notebook PCs running Linux or FreeBSD/NetBSD/OpenBSD and X Windows. It displays charge left in the battery, the time left to the total discharge of the battery, computer is connected to the mains or is working on a battery and the battery status high/low/critical.

Download Website Updated 30 Jan 2001 backupsd

Pop 19.77
Vit 1.00

backupsd is an ultra-simple daemon to handle emergency shutdown of a NetBSD system when a connected APC Back-UPS signals a power failure. This is an ongoing project; suggestions, bugfixes, and additional code are appreciated.

Download Website Updated 13 Feb 2001 bpowerd

Pop 14.83
Vit 1.44

bpowerd is a daemon and makes proper use of the system log for error checking. It uses init's powerstatus calls to do it's dirty work, instead of calling shutdown itself. bpowerd is easy to compile and configure, using GNU's autoconf and providing explicit instructions for testing and installation. bpowerd was created using specs provided from the manufacturer, as opposed to reverse-engineering.

Download Website Updated 13 Aug 2005 inactive

Pop 21.45
Vit 2.49

inactive is a script which checks the running applications against its list of applications passed on the command line. If none of the applications is running for a specified amount of time, the machine is shut down.

Download No website Updated 30 Jan 2001 inpowerd

Pop 22.27
Vit 1.00

inpowerd is an inetd server that receives power event notifications over the network and notifies sysvinit about these power events. It is useful when more than one machine is connected to the same UPS but only one of them communicates with the UPS directly. The rpwrstat utility, which is distributed with inpowerd, can be used to notify inpowerd about power events. The rpwrstat utility is easy to port and currently known to work on Linux/Unix and NetWare. The rpwrstat distribution contains a compiled NetWare Loadable Module which is tested on IntraNetWare 4.11. This makes it possible to connect machines running NetWare and Linux to the same UPS.

Download Website Updated 22 Nov 2013 Network UPS Tools

Pop 326.31
Vit 34.23

Network UPS Tools (also known as NUT) is an extremely powerful and versatile client/server based approach to UPS monitoring. Products from a wide range of vendors (APC, Belkin, Best Power, MGE, Tripp-Lite, etc.) are supported. A shared UPS can be monitored by one host, notifcations being sent to the other hosts via authenticated TCP connections. A Web interface is available, as is a Windows client.

Download Website Updated 30 Jan 2001 Pulsard

Pop 20.05
Vit 1.00

Pulsard allows you to monitor an MGE Pulsar UPS to initiate a clean shutdown in case of a power outage. It also monitors the quality of the power line. It has only been tested on Linux with the Pulsar ES8+ and the ESV8+. It uses libgpio (from the gphoto project) to communicate with the UPS, making it easy to extend it to other communication channels than RS-232.

Download Website Updated 23 Jan 2006 Suspend2

Pop 257.01
Vit 3.80

Suspend2 allows you to hibernate your machine without needing APM, BIOS, or ACPI support. It creates an image that is saved in your active swap partitions, swap files, ordinary files or (soon) across a network. At the next system boot, the kernel detects the saved image, restores the memory from it and then it continues to run as if you'd never powered down.

Download Website Updated 22 May 2005 TrinityOS

Pop 382.08
Vit 4.48

TrinityOS is a step-by-step, example-driven HOWTO on building a very functional Linux box with strong security in mind. TrinityOS is well known for its strong packet firewall ruleset, Chrooted and Split DNS (v9 and v8), secured Sendmail (8.x), Linux PPTP, Serial consoles and Reverse TELNET, DHCPd, SSHd, UPSes, system performance tuning, the automated TrinityOS-Security implementation scripts, and much more.

Download No website Updated 06 Feb 2001 Generic Power Monitoring for Linux

Pop 36.88
Vit 69.42

Genpower is a UPS monitoring program for Linux. It supports common UPSs like APC, BackUPS, and Tripplite models. This is a updated version of an old genpower utility found on Metalab, with added support for new UPSs.


Project Spotlight


A network monitoring and management system.


Project Spotlight


A designer’s program for describing parts of the building.