rgbproc-repository is intended for use with Xilinx EDK tools. It consists of many units written in VHDL that can be used to build a design for image/video processing. The backbone is the data bus (called simply RGB) that is used to pass data (typically) from VGA input to VGA/DVI output.
LinCAN is a Linux kernel module which implements a CAN driver capable of working with multiple cards, even with different chips and IO methods. Each communication object can be accessed from multiple applications concurrently. The driver supports Linux 2.4.x, 2.6.x, and 3.x kernels and implements select, poll, fasync, O_NONBLOCK, and O_SYNC semantics and multithreaded read/write capabilities. It works with the common Intel i82527, Philips 82c200, and Philips SJA1000 (in standard and PeliCAN mode) CAN controllers. It is part of a set of CAN/CANopen-related components developed as one of the OrtCAN project components.
CANpie defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer 2 (Data Link Layer). The CANpie driver is the base for HLPs like CANopen, DeviceNet, J1939, etc. Through its low memory footprint, CANpie can be used for embedded applications (without any OS) as well as for Linux. Access to the Linux CAN driver is via a socket interface (AF_CAN).
DirectFB is a thin library that provides developers with hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware.
MuProg is a user space program for programming Atmel AVR microcontrollers. It needs the katmel kernel driver. This application can program the fuses, lock bits, EEPROM, and the flash ROM. It reads hex files. Most AVR microprocessor types are supported and automatically identified by requesting the Chip ID (if supported).
katmel is a Linux kernel driver for any Atmel AVR serial programmers on the parallel port of your PC. All kinds of programmers are supported due to configurable pin-to-signal mapping. This is only the kernel driver. It has been tested against kernel version 2.4.21. The MuProg project uses this kernel interface to implement an Atmel AVR microcontroller programmer for Linux.
nMicrocoder is an ncurses EDA tool to write microcode. Basically, it is a stripped down spreadsheet program that lets you fill a table with "0", "1", and "-", and gives you compile-ready verilog code in return. It was written as an alternative to full spreadsheet programs. It is known to run on Linux, IRIX, and Solaris, unless ncurses 5.3 is installed.
JTAG Tools is a software package which enables working with JTAG-aware (IEEE 1149.1) hardware devices and boards through a JTAG adapter. This package has an open and modular architecture with the ability to write miscellaneous extensions like board testers, flash memory programmers, and so on.