DirectFB is a thin library that provides developers with hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware.
WANPIPE S-series is a family of intelligent multi-protocol WAN and ADSL adapters that support data transfer rates up to 8Mbps. All WAN protocols supported by WANPIPE are implemented in firmware and run on the card. An advantage of an intelligent adapter is that it offloads the system CPU and improves stability. By adding a Sangoma WAN/ADSL component to the Linux kernel, one can create a powerful multi-T1/ADSL router/firewall with proven reliability of Linux. Sangoma S-series cards support an optional on board T1/E1 CSU/DSU that eliminates all external components of a traditional routing solution: i.e. T1/E1 line can be directly connected to the card. WANPIPE supports the following protocols, ATM, ADSL, Frame Relay, PPP, MULTILINK PPP, CHDLC, X25(API), BitStreaming (API), BiSync(API), and SDLC(API). Furthermore, WANPIPE supports custom API development such as: Credit card verification, Voice-over IP, Satellite Comm. All device drivers are part of the standard Linux Kernel distribution.
Linux is a clone of the Unix kernel, written from scratch by Linus Torvalds with assistance from a loosely-knit team of hackers across the Net. It aims towards POSIX and Single UNIX Specification compliance. It has all the features you would expect in a modern fully-fledged Unix kernel, including true multitasking, virtual memory, shared libraries, demand loading, shared copy-on-write executables, proper memory management, and TCP/IP networking.
TA-Linux is a Linux distribution that targets power users. It features a small base installation that end users can expand to include any required software. It also attempts to support as many different architectures as possible - at this time x86 is fully supported, with Alpha, SPARC, PPC, and PA-RISC around the corner.
Pklinux-bigi is a Slackware derived distribution based on glibc 2.2 and Linux 2.4.0-test11. It can run on 386, 486, 586, and Pentium machines with only 4 MB of RAM. Builtin features include IP tunneling, firewalling, encapsulation, QOS(based on ipv4 RSVP), kernel debugging, loopback, network block device, and numerous filesystems (including ntfs and sysV). It contains Apache, proftpd, bind 9.0, syslogd, sendmail, iptables, iproute2, and gated. NAT configuration by iptables is included by default. It is a loopdisk based distribution which can be directly run from DOS, no hdd partitioning needed. This distribution is kept as minimal as possible and it can be useful in places where you want a low end computer to act as a firewall, webserver, mail server, router, or an alternative to zipslack.
QuickSwitch lets you switch network profiles on the fly (IP address, DNS, routes, NFS shares, etc.). There is a command-line configuration mode by which you can change your entire network setting in one line (including DNS and routing table). It is highly configurable, supports DHCP/BOOTP/NIS/NFS/etc., and also includes a curses-based GUI which you can use as a profile selector on startup.
fli4l is a single-floppy Linux-based ISDN/DSL/ethernet-router. It features configuration with some simple ASCII-files, several possible connection-flavors (in/out/callback, and raw IP/PPP), channel bundling (an extra channel can be added through a Windows/Unix-client), configuration of multiple networks, least-cost routing, automatic choice of provider, display/calculation of connection times and costs, and a Windows/Unix client to control dial/hangup, monitor traffic and monitor incoming calls on ISDN (see screenshot).
Recovery Is Possible (RIP) is a CD or USB boot/rescue/backup/maintenance system. It has support for many filesystem types (Reiserfs, Btrfs, Ext2/3/4, HFS+, ISO-9660, Squashfs, UDF, XFS, JFS, UFS2, CIFS, MS DOS, NTFS, and VFAT) and contains several utilities for system recovery. It also has IDE/SCSI/SATA, RAID, LVM2, and Ethernet/Wireless network support.