72 projects tagged "GPL v2 Or Later"
Updated 16 May 2013
RCP100
| Pop | 212.65 |
|---|---|
| Vit | 19.04 |
RCP100 is a modular router control plane for Linux platforms. It can be used as a standalone router, or it can be deployed as an embedded router in a virtualized environment. The modular architecture allows rapid introduction of new features and functionality, including support for custom hardware. It features a command line interface, Web interface, Telnet, FTP, and TFTP access, an NTP client and server, a DNS proxy cache, a DHCP relay, static routes, blackhole routes, static ARP, proxy ARP, RIP version 2 (RFC 2082, RFC 2453), OSPF version 2 (RFC 2328), and Access Control Lists.
Updated 13 May 2013
Sanewall
| Pop | 244.65 |
|---|---|
| Vit | 4.42 |
Sanewall is a firewall builder for Linux that uses an elegant language abstracted to just the right level. This makes it powerful and easy to use, audit, and understand. It allows you to create very readable configurations even for complex stateful firewalls. Sanewall can be used for almost any purpose, including control of any number of internal/external/virtual interfaces, control of any combination of routed traffic, setting up DMZ routers and servers, all kinds of NAT, providing strong protection (flooding, spoofing, etc.), transparent caches, source MAC verification, blacklists, and whitelists. Newer versions abstract the differences between IPv4 and IPv6, allowing you to define a common set of rules for both, while permitting specific rules for each as you need. Sanewall is a fork of FireHOL and can make use of existing FireHOL configurations.
Updated 12 May 2013
ocserv
| Pop | 218.89 |
|---|---|
| Vit | 5.15 |
OpenConnect server (ocserv) is an SSL VPN GNU/Linux server. Its purpose is to be a secure, small, fast, and configurable VPN server which depends on standard protocols like TLS 1.2 and Datagram TLS. It implements the AnyConnect SSL VPN protocol and is compatible with the OpenConnect VPN client and other Anyconnect SSL VPN clients.
Updated 06 May 2013
virtenv
| Pop | 174.70 |
|---|---|
| Vit | 3.13 |
virtenv is a QT4 application which configures and starts a virtual desktop environment based on LXC. The container is run on a copy of your current filesystem, it uses its own X server, and you can configure the type of network access you need.
Updated 03 May 2013
Dianara
| Pop | 105.00 |
|---|---|
| Vit | 4.89 |
Dianara is a client for the Diaspora social network. It allows users to manage their Diaspora social network accounts without using a Web browser. Currently, it’s basically an empty shell. It allows you to enter your Diaspora ID (username@podname) and authentication token, and your last 15 public posts are fetched and presented. There is some basic Markdown support.
Updated 14 Apr 2013
Qmmp
| Pop | 56.56 |
|---|---|
| Vit | 1.54 |
Qmmp (Qt-based Multimedia Player) is an audio player with a user interface similar Winamp or Xmms. Alternative user interfaces also are available.
Updated 06 Apr 2013
Barry
| Pop | 141.65 |
|---|---|
| Vit | 17.19 |
Barry is an Open Source application that provides a Desktop GUI, synchronization, backup, restore, program management, and raw channel support for BlackBerry devices.
Updated 05 Mar 2013
conntrack-tools
| Pop | 310.62 |
|---|---|
| Vit | 21.53 |
conntrack-tools is a set of userspace tools for Linux that allow system administrators to interact with the Connection Tracking System, the module which provides stateful packet inspection for iptables. It includes the userspace daemon conntrackd and the commandline interface conntrack.
Updated 04 Mar 2013
nfacct
| Pop | 126.40 |
|---|---|
| Vit | 3.08 |
nfacct is a command line utility used to create, retrieve, and delete Netfilter accounting objects.
Updated 25 Feb 2013
NetworkManager
| Pop | 256.63 |
|---|---|
| Vit | 16.03 |
The GNOME NetworkManager is a set of co-operative tools that make networking simple and straightforward. Whether wireless or wired, NetworkManager allows you to quickly move from one network to another: once a network has been configured and joined once, it can be detected and re-joined automatically at a later date. It was designed to auto-detect as much information as possible, seamlessly switches connections when necessary, and provides immediate feedback of the network state to users and applications.
