Release Notes: This release adds support for B600 Analog Card, task stop function on shutdown, X21 support, an option to run Zaptel & TDM API on the same span, and the XMTP2 API for old PMC T1/E1 cards. It fixes the TTY driver for Linux kernel 2.6.26 and greater, tristate mode using wanpipemon, yellow alarm handler on T1/E1, E3 support for A301 cards, Serial AFT card events, and the Channel Bank ring problem on AFT T1/E1 cards. It updates AFT Core to fix XMTP2 startup with 16E1 links.
Release Notes: The TDM API has been updated to fix FreeSwitch analog support. Support has been added for analog TDM API TAPPING mode and Zaptel/DAHDI operation mode. An MTP2 option has been added to LibSS7. The TDM API has been updated for A200 to fix issues with FreeSwitch OpenZAP with TDM API for Analog. There is a minor bugfix in the XMTP2 API. The T1/E1 Loopback commands have been updated for the wanpipemon utility. Linux 2.6.25 and 2.6.26 support is fixed. The AFT driver has been updated to implement a new loopback command. Asterisk DAHDI support has been added. A possible race condition has been fixed in the A200/A400 Analog driver.
Release Notes: This release adds bri and zaptel installation modes. It streamlines the Setup installation script. It has improved faxing over SMG Gateway and Zaptel Analog. It adds overlap dialing support. It adds support for BRI with 16-channel Echo Canceler. It fixes the BRI chip security handler. It is updated for new PLX and Tundra PCIe Bridges chips. It updates hwprobe verbose for PMC Shark, and is updated for the 2.6.25 kernel. 64-bit compilation for Octasic EC Image has been fixed. wancfg_smg has been updated to configure the XMTP2 API. MTP2 API support has been added.
Release Notes: This release fixed segfault issues under GCC and added the ability to disable the BRI clock reference and support for show_spans and show_calls, multiple MSNs, and timer_t3 and timer_t302. The Maxim T1 Rx Level now defaults to 36dB and E1 Rx Level to 42dB. Minor updates were made to BRIs to better conform to the TBR3 Certification. Startup BRI hwec configuration issues were fixed. Support for Linux 2.6.24 was added along with a TBR21 operation mode, MPAPI X25 support for AFT A144/A142 cards, Wireshark support, support for newer clocks, and assorted minor bugfixes.
Release Notes: This release added A500 hardware support with the NetBricks BRI Stack. There were also major A500 driver updates and fixes. Support for serial A142/A144 hardware, AFT A056 56K, hardware and HW DTMF was added. Legacy protocols were updated for the new front end architecture. PMC framers were modified for lowered LOS sensitivity. Fake up/down state changes on started inactive lines were fixed. MAXIM framers have been updated for lowered sensitivity. Cable cross talk on 8 port cards has been fixed. Support for Unframed E1 and Tri-State Mode has been enabled. Loopback commands have been fixed. There were numerous bugfixes and minor enhancements.
Release Notes: Support has been added for AFT 301, A101D, and A101DX. For AFT T1/E1, CAS signaling support has been improved. Compatibility support has been added for the original A102 config to work with A102D cards. The TDM API has been updated for an unlimited number of /dev/wptdm devices. The Hardware Echo Canceler has been updated with noise suppression. The build system has been updated. The Zaptel patch has been updated to 1.2.17.
Release Notes: A pulse dialing bug in A200 driver was fixed. The AFT HWEC on 64-bit kernels was fixed. A108D hardware support was added. A bugfix was made in A104 and A104D Ref Clock. Updates were made for 2.6.16 and 2.6.17 kernels. Frame relay was updated with EEK support. PPP IP negotiation was updated. A fatal bug in the ADSL driver was fixed. The AFT A104/A108 driver was updated for 64-bit kernels with over 4GB of memory. Sangoma Signal Media Gateway has been added to the package. LibSangoma has been added to support custom-written TDM applications.
Release Notes: Support for 2.6.x kernels. Support for new AFT T1/E1 hardware. Updated Bitstrm Switching to support wanpipe serial cards. A robbit signaling API has been added to Bit Streaming drivers for voice applicatoins. The Chdlc startup code has been updated to only enable comms after the front end has come up. wanpipemon tracing and decoding has been updated. PCAP Ethereal support has been added. The wanpipe headers have been fixed so that drivers can be compiled inside of the kernel source tree.
Release Notes: A new ATM driver for S514(T1/E1) cards (PHY-layer, AAL5, OAM, and unlimited VPI/VCI PVCs), major bug fixes in the ADSL driver, multi-protocol driver support (HDLC/PPP/CHDLC), multi-protocol API support, (X25/LAPB and DSP), and updates to the Wanpipe documentation and utilities.
Release Notes: This release supports the ATM protocol with all S514 (T1/E1/V35) cards, IP, ethernet, and PPPoE over ATM, and ATM ALL5 SAR/PHY for T1/E1. POS (Point of Sale) S509/S515 cards are also supported. The IBM 4680, NCR 2126, and NCR 1255 proprietary protocols are also supported. It also includes a major bugfix in the RX data path, event-based line debugging, default and custom compilation options, and fixed bitstreaming for E1 cards.