Release Notes: This release added A500 hardware support with the NetBricks BRI Stack. There were also major A500 driver updates and fixes. Support for serial A142/A144 hardware, AFT A056 56K, hardware and HW DTMF was added. Legacy protocols were updated for the new front end architecture. PMC framers were modified for lowered LOS sensitivity. Fake up/down state changes on started inactive lines were fixed. MAXIM framers have been updated for lowered sensitivity. Cable cross talk on 8 port cards has been fixed. Support for Unframed E1 and Tri-State Mode has been enabled. Loopback commands have been fixed. There were numerous bugfixes and minor enhancements.
Release Notes: This release added W400 GSM support for Asterisk/Dahdi and FreeSWITCH/FreeTDM. Support was provided for the B610 FXS, B610 Single FXS board, B500 4 port BRI board, Dahdi 2.6, and Linux 3.2.6. Numerous bugs were fixed.
Release Notes: This release adds an MTP1 msu/lssu filter option, LINEAR mapping of A108 ports for use with T3Mux, HW Echo Cancellation Clock failover, and Global Poll IRQ mode for efficient high density HDLC TX/RX. It has been updated to Linux 2.6.39 and 3.0.1. There are numerous bugfixes.
Release Notes: Tone Event API to include tone types DTMF, FAX_1100, FAX_2100, and FAX_2100_WSPR. Updated to Linux 2.6.36. A serial clock recovery feature, a new echo canceler image, and SW HDLC. Support to run on Xen virtual machines. New firmware for A108&A104 V43. Support for B800, B700, B601, B600, USB-FXO cards, TDM API Analog rx gain feature, front end Reset Detection, and Free Run Timer interrupt. Autodetection of USB support so that the driver will compile correctly on a kernel without USB support. The wait object has been redesigned for Linux/Windows integration. Hardware support has been added. Bugfixes.
Release Notes: This release adds support for B600 Analog Card, task stop function on shutdown, X21 support, an option to run Zaptel & TDM API on the same span, and the XMTP2 API for old PMC T1/E1 cards. It fixes the TTY driver for Linux kernel 2.6.26 and greater, tristate mode using wanpipemon, yellow alarm handler on T1/E1, E3 support for A301 cards, Serial AFT card events, and the Channel Bank ring problem on AFT T1/E1 cards. It updates AFT Core to fix XMTP2 startup with 16E1 links.
Release Notes: The TDM API has been updated to fix FreeSwitch analog support. Support has been added for analog TDM API TAPPING mode and Zaptel/DAHDI operation mode. An MTP2 option has been added to LibSS7. The TDM API has been updated for A200 to fix issues with FreeSwitch OpenZAP with TDM API for Analog. There is a minor bugfix in the XMTP2 API. The T1/E1 Loopback commands have been updated for the wanpipemon utility. Linux 2.6.25 and 2.6.26 support is fixed. The AFT driver has been updated to implement a new loopback command. Asterisk DAHDI support has been added. A possible race condition has been fixed in the A200/A400 Analog driver.