Release Notes: This release added W400 GSM support for Asterisk/Dahdi and FreeSWITCH/FreeTDM. Support was provided for the B610 FXS, B610 Single FXS board, B500 4 port BRI board, Dahdi 2.6, and Linux 3.2.6. Numerous bugs were fixed.
Release Notes: This release adds an MTP1 msu/lssu filter option, LINEAR mapping of A108 ports for use with T3Mux, HW Echo Cancellation Clock failover, and Global Poll IRQ mode for efficient high density HDLC TX/RX. It has been updated to Linux 2.6.39 and 3.0.1. There are numerous bugfixes.
Release Notes: Tone Event API to include tone types DTMF, FAX_1100, FAX_2100, and FAX_2100_WSPR. Updated to Linux 2.6.36. A serial clock recovery feature, a new echo canceler image, and SW HDLC. Support to run on Xen virtual machines. New firmware for A108&A104 V43. Support for B800, B700, B601, B600, USB-FXO cards, TDM API Analog rx gain feature, front end Reset Detection, and Free Run Timer interrupt. Autodetection of USB support so that the driver will compile correctly on a kernel without USB support. The wait object has been redesigned for Linux/Windows integration. Hardware support has been added. Bugfixes.
Release Notes: This release adds support for B600 Analog Card, task stop function on shutdown, X21 support, an option to run Zaptel & TDM API on the same span, and the XMTP2 API for old PMC T1/E1 cards. It fixes the TTY driver for Linux kernel 2.6.26 and greater, tristate mode using wanpipemon, yellow alarm handler on T1/E1, E3 support for A301 cards, Serial AFT card events, and the Channel Bank ring problem on AFT T1/E1 cards. It updates AFT Core to fix XMTP2 startup with 16E1 links.
Release Notes: The TDM API has been updated to fix FreeSwitch analog support. Support has been added for analog TDM API TAPPING mode and Zaptel/DAHDI operation mode. An MTP2 option has been added to LibSS7. The TDM API has been updated for A200 to fix issues with FreeSwitch OpenZAP with TDM API for Analog. There is a minor bugfix in the XMTP2 API. The T1/E1 Loopback commands have been updated for the wanpipemon utility. Linux 2.6.25 and 2.6.26 support is fixed. The AFT driver has been updated to implement a new loopback command. Asterisk DAHDI support has been added. A possible race condition has been fixed in the A200/A400 Analog driver.
Release Notes: This release adds bri and zaptel installation modes. It streamlines the Setup installation script. It has improved faxing over SMG Gateway and Zaptel Analog. It adds overlap dialing support. It adds support for BRI with 16-channel Echo Canceler. It fixes the BRI chip security handler. It is updated for new PLX and Tundra PCIe Bridges chips. It updates hwprobe verbose for PMC Shark, and is updated for the 2.6.25 kernel. 64-bit compilation for Octasic EC Image has been fixed. wancfg_smg has been updated to configure the XMTP2 API. MTP2 API support has been added.
Release Notes: The Excessive Error check that disabled the port has been removed. Support for new PLX2 and TUNDRA PCIe chips has been added.
Release Notes: hwprobe was updated to add the A056 card. wireshark tracing was added for wanpipemon PRI/BRI. Packet handling in bh was optimized for the LIP Layer. The code was updated for 2.6.24 and 2.6.25 kernels. Maxim T1 and E1 Rx Level now default to 36DB and 42DB respectively. Optional PCI parity check was added to wanrouter.
Release Notes: This release fixed segfault issues under GCC and added the ability to disable the BRI clock reference and support for show_spans and show_calls, multiple MSNs, and timer_t3 and timer_t302. The Maxim T1 Rx Level now defaults to 36dB and E1 Rx Level to 42dB. Minor updates were made to BRIs to better conform to the TBR3 Certification. Startup BRI hwec configuration issues were fixed. Support for Linux 2.6.24 was added along with a TBR21 operation mode, MPAPI X25 support for AFT A144/A142 cards, Wireshark support, support for newer clocks, and assorted minor bugfixes.
Release Notes: This release fixes T3 Loopback commands. It has a performance improvement on T3/E3 drivers when handling VOIP and Data traffic. There are minor bugfixes.