Projects / VNC Reflector / Comments

Comments for VNC Reflector

29 May 2003 11:50 const

Re: which parameters are neccessary when run?

> First, I start a tightvnc server on a pc
> with the ip: 192.168.1.10. Then I run
> vnc reflector on the second
> pc(192.168.1.5)with the following
> parameter :" -p psw.txt -b
> 192.168.1.10 host.txt".

The -b option does not look good. Did you try to run the reflector without this option. Also note that you have to specify display number :99 when connecting to the reflector. Finally, the log file contents can be helpful - see the reflector.log file.

07 May 2003 20:50 thanX

which parameters are neccessary when run?
I try to use vnc reflector in a local network, somehow I can't get it work:(. Here's the detail.
First, I start a tightvnc server on a pc with the ip: 192.168.1.10. Then I run vnc reflector on the second pc(192.168.1.5)with the following parameter :" -p psw.txt -b 192.168.1.10 host.txt".When I try to connect to vnc reflector in the third pc with vncviewer, it says "fail to connect to server".Here's my psw.txt:first line"vip",second line"friend". And my host.txt: "192.168.1.10:0 vncref".
Do I miss any parameter,or I write wrong file?
Thanks in advance.
thanX

Screenshot

Project Spotlight

ReciJournal

An open, cross-platform journaling program.

Screenshot

Project Spotlight

Veusz

A scientific plotting package.