Projects / FTimes / Comments

Comments for FTimes

30 Apr 2007 05:12 philc71

Re: please contact me
Thanks Klayton,

Yep got your email, but for some reason my return email kept bouncing back.

So here's my story I purchased a netgear sc101 about 6 months ago as it offered a network storage system which took 2 drives and one could be a mirror of the other, so I set my 2 drives up as a mirror. To cut a long story short I was experiencing some issues (seeing different data from 2 machines) and the management tool suggested a firmware upgrade which I did only to experience more issues (could then only see old data) so I restored my machines to 2 days prior (without the software and firmare upgrades) and did a reset of the actual device (I have since discovered they recommend against that, they have also removed the software and firmware upgrade as it caused alot of people issues).

I've been thru the netgear channels (and still am chasing that) but they shouldn't be praised for their customer service.

So my situation now is that the device does not recognise the 2 drives at all and whilst I think the device itself will become a door stop or a paper weight I need to get my data back from the disks. I know this much that the device itself runs the dataflow-zfs file system from zetera. I can obviously put these drives in my desktop and while the drives appear healthy I cannot read them, so I need a utility like ftimes or something that can and I noticed that in the changelog you suggest that ftimes implements the dataflow-zfs.

So what I was hoping you could help me with is firstly to confirm whether I should be able to read the drives with your utility and if so I was a bit vague on building it and it's usage. If ftimes doesn't I'd appreciate if you could point me in the direction to sort my problem out if possible that is.

Thanks for replying and I appreciate greatly any help

Cheers,

Phil.


25 Apr 2007 18:48 mavrik

Re: please contact me


> Klayton,

>

> Can you please contact me as I have some

> questions as to whether I can use ftimes

> to extract some files off my drives that

> use the dataflow-zfs filesystem. My

> email address is phil@aliado.com.au

>

> Cheers,

> Phil.

Phil,

I sent an email to your address on April 21st. Hopefully, it made it through.

later,

Klayton

16 Apr 2007 23:48 philc71

please contact me
Klayton,

Can you please contact me as I have some questions as to whether I can use ftimes to extract some files off my drives that use the dataflow-zfs filesystem. My email address is phil@aliado.com.au

Cheers,
Phil.

Screenshot

Project Spotlight

ReciJournal

An open, cross-platform journaling program.

Screenshot

Project Spotlight

Veusz

A scientific plotting package.