RSS Comments for cdrdao & GCDMaster

05 Oct 2003 17:27 syberdave

Re: 12x burning
for burnproof, i think you could pass the burnfree option to the driver, so it would be like:

--driver generic-mmc-raw:burnfree

> Has anyone gotten 12x burning with
> cdrdao working?
> I can burn at 8x with my 12/10/32
> plextor no problem, but try 12x and it
> will quit out after about 10 seconds
> with errors.
> Also, how hard would it be to add
> Burn-Proof support to cdrdao? I'd love
> to add it in but don't know much about
> cdr programming.

16 Jun 2003 18:09 jrjohns3

Re: 12x burning

> Has anyone gotten 12x burning with
> cdrdao working?
> I can burn at 8x with my 12/10/32
> plextor no problem, but try 12x and it
> will quit out after about 10 seconds
> with errors.
> Also, how hard would it be to add
> Burn-Proof support to cdrdao? I'd love
> to add it in but don't know much about
> cdr programming.

I have been burning 12x for years with my plextor scsi using the cheapest blank cds I can find. Try upping your buffer size or burn a cd using the command line without anything running (especially xwindows) to narrow down your problem scope.
Good Luck,

Jake Johnson
jake@plutoid.com
www.plutoid.com (www.plutoid.com)

16 Jun 2003 18:05 jrjohns3

A must have
I have been using this program for years and is the only program I have ever seen that allows me to make my own table of contents. I love making fake tracks with my 80 minute songs. Thanks a ton for the great program,
Jake Johnson

jake@plutoid.com

www.plutoid.com (www.plutoid.com)

14 Jan 2003 07:42 johndim

downloading and using
I downloaded previously cdrdao as a part of the package vcdeasy, but when choosing to integrate it, I'm getting
problems at the burning stage, where my
cdr's are ignored or detected to be not empty. Trying to use cdrdao separately, I cannot find it on my pc working under WinMe. Trying to download it separately this time
at prdownloads.sourceforg... (I guess I need the win32) results in an empty download showing just the title of the zip file, but no content to be unzipped...
Please let me know why I might not download the program or use it.

03 Oct 2002 16:24 rjsheehy

Re: fail
Here is the fix to this problem.

As root, run "MAKEDEV sg"

This will recreate the sg devices.

Worked for me under Debian 3.0

> I fail to use cdrdao, please help.
> here is my command:
> cdrdao copy --device 1,1,0 --driver
> generic-mmc
> --source-device 1,0,0
> --source-driver generic-mmc
> --on-the-fly --simulate
> --speed 8 -v 3 --eject
>
> and i saw this:
> ERROR: Cannot open SCSI device '1,1,0':
> Cannot open '/dev/sg0'
> ERROR: Please use option '--device
> bus,id,lun', e.g. --device 0,6,0
> ERROR: Cannot setup device 1,1,0.
>
> how to solve this problem?
> I have a cdrom at /dev/scd0(/dev/hdc)
> and a cd-writer at /dev/scd1(/dev/hdd)
> with ide-scsi emulator.
> This work well on x-cd-roast.
> The parameters 1,0,0 and 1,1,0 and given
> by cdrecord -scanbus.
>
> Is that "Cannot open
> '/dev/sg0'" the problem?
> Should I try to make a link to /dev/sg0
> (/dev/scd0 -> /dev/sg0)?
>
> thanks.
>

14 Sep 2002 20:27 netllama

Re: fail

> I fail to use cdrdao, please help.

And somehow you thought that Freshmeat was a technical support forum? Did it not occur to you to perhaps contact the author of the software?

16 Aug 2002 20:49 lihb

fail
I fail to use cdrdao, please help.
here is my command:
cdrdao copy --device 1,1,0 --driver generic-mmc
--source-device 1,0,0 --source-driver generic-mmc
--on-the-fly --simulate --speed 8 -v 3 --eject

and i saw this:
ERROR: Cannot open SCSI device '1,1,0': Cannot open '/dev/sg0'
ERROR: Please use option '--device bus,id,lun', e.g. --device 0,6,0
ERROR: Cannot setup device 1,1,0.

how to solve this problem?
I have a cdrom at /dev/scd0(/dev/hdc) and a cd-writer at /dev/scd1(/dev/hdd) with ide-scsi emulator.
This work well on x-cd-roast.
The parameters 1,0,0 and 1,1,0 and given by cdrecord -scanbus.

Is that "Cannot open '/dev/sg0'" the problem?
Should I try to make a link to /dev/sg0 (/dev/scd0 -> /dev/sg0)?

thanks.

26 Nov 2000 06:05 fuck

Last track skipping
I created a toc file with tocmake.pl (on freshmeat). Very simple with a set of TRACK... FILE... pairings. The disc burnt fine BUT at the end of the last track, my CD player keeps skipping back to a random point in the last track. I've burnt 4 discs and they all suffer from this end-of-last-track skipping. Any ideas?

04 Sep 2000 14:32 hannuliljemark

Has anyone burned bin/cue images with this using HP7570i?
Seems like a great program indeed, but the problem is i can't burn bin/cue images with this 'cos -- according to the documentation -- the cue files need some hacking with my HP7570i.
If anyone knows more about this, please let me know :-/

17 Aug 2000 17:03 taco

12x burning
Has anyone gotten 12x burning with cdrdao working?

I can burn at 8x with my 12/10/32 plextor no problem, but try 12x and it will quit out after about 10 seconds with errors.

Also, how hard would it be to add Burn-Proof support to cdrdao? I'd love to add it in but don't know much about cdr programming.

Screenshot

Project Spotlight

pstoedit

A converter from Postscript(TM) and PDF to other vector graphic formats.

Screenshot

Project Spotlight

Multi-OTP

A PHP class to authenticate and manage OTP user tokens for strong authentication.