couldn't get it working
kernel 2.6.22, using one of the example configs provided to throttle the upload to one of my hosts
everything seems fine except there's no throttling whatsoever
Download limit ok but upload is not....
/sbin/iptables -t mangle -A PREROUTING -s 10.10.50.1 -j MARK --set-mark 1
eth: 2 eth. device.
eth0: local (network is 10.0.0.0/8)
eth1: internet (real)
Re: Bad Interpreter
> Does anyone know why i get the messages
> "bad interpreter"?
Hi, i had this problem, too!
There are two reasons for an errormessage like
"bad interpreter -- no such file or directory"
Both relate on the first line of the script:
Okay one reason could be that your "bash" is not in /bin/ (but thats very unusual) or that you don't have a bash-console.
The second reason could be, that you have downloaded the script via your windows-Computer and copied it to your linux-server .
If this hapened, then you have on each line a CR and a LF ("carriage return" and "line feed").
But your Linux understands just the CR .
So you need to transform your script into unix-format with a program like dos2unix or you download the script with your linux-machine directly.
I hope that will help
Does anyone know why i get the messages "bad interpreter"?
configure cbq to limit on all but a few ports
I've been using this script successfully to shape bandwidth, but I would like to set it up to limit bandwidth on all ports except for a few. It seems a new p2p file sharing port pops up every week--so this would help me keep up with controlling this type of activity.
So, is there an appropriate syntax to identify traffic on all ports but a sellected few. Alternatively, it would be nice to specify a range of ports.
Any suggestions or help would be appreciated.
Re: CBQ on SuSE Linux
> I'm trying to run CBQ on SuSE Linux
> Kernel 2.2.19, but it keeps
> "ip-route2 not installed"
> This utilities package is
> according to YaST (SuSE Setup
> I tried to find
> information/documentation/paper on
> web, but I couldn't.
> Can anyone help me? Thanks in
I know the Problem with CBQ.INIT...
Must change the path of tc and ip in
the cbq.init script. In the Script tc
and ip lies in /usr/sbin. You must
correct this path for both. At this
you can use it on your SuSE 7.2... I
use it at the moment with SuSE 8.0
Greeting from Germany
CBQ on SuSE Linux
I'm trying to run CBQ on SuSE Linux 7.2 Kernel 2.2.19, but it keeps returning me "ip-route2 not installed" message.
This utilities package is installed, according to YaST (SuSE Setup Tool).
I tried to find information/documentation/paper on the web, but I couldn't.
Can anyone help me? Thanks in advance!
Could somebody help me with the configuration of cbq?
my link to internet is of 96 kbit and has 50 clients
I would like, for example, that each client goes down to 2kbit and that if the is linked don't use it doesn't block in 2kbit
A port of the old DOS arcade game C-Dogs.
A Firefox sync server written in Perl.