lftp is a sophisticated command line based file transfer program. Supported protocols include FTP, HTTP, SFTP, and FISH. It has a multithreaded design allowing you to issue and execute multiple commands simultaneously or in the background. It also features mirroring capabilities and will reconnect and continue transfers in the event of a disconnection. Also, if you quit the program while transfers are still in progress, it will switch to nohup mode and finish the transfers in the background. Additional protocols supported: FTP over HTTP proxy, HTTPS and FTP over SSL, BitTorrent protocol. IPv6 is fully supported. There are lots of tunable parameters, including rate limitation, number of connections limitation and more.
Release Notes: This release fixes ASCII mode uploads to SFTP, the "local" command without arguments, compilation without SSL, HTTPS, and large memory consumption in FTP when the target disk is full.
LogAnalyzer is a Web front-end for syslog and other network event data. It provides easy browsing, searching, basic analysis, and some graphics. Data is taken from databases or plain syslog text files, so LogAnalyzer does not require changes to an existing logging infrastructure. Depending on the log data present, it can process syslog messages, Windows event log entries, and some more exotic things. Its troubleshooting support enables users to quickly find solutions to problems seen in the log data. LogAnalyzer was previously called phpLogCon, and has been renamed since v3.
Release Notes: This release adds "Eventlog Audit Summary Report", which can generate detailed security reports for Windows Eventlog security records. It supports Windows 2003 and 2008 Server and is compliant with the Sarbanes-Oxley (SOX) Act, 2002. It adds support for customized Boolean report filters. This enhancement is also used by the new "Eventlog Audit Summary Report".
nxlog is a modular, multi-threaded, high-performance log management solution with multi-platform support. In concept, it is similar to syslog-ng or rsyslog, but is not limited to Unix/syslog only. It can collect logs from files in various formats, receive logs from the network remotely over UDP, TCP, or TLS/SSL on all supported platforms. It supports platform-specific sources such as the Windows Eventlog, Linux kernel logs, Android device logs, local syslog, etc. Writing and reading logs to/from databases is also supported for many database servers. The collected logs can be stored into files, databases, or forwarded to a remote log server using various protocols. The old BSD Syslog and the newer IETF syslog standard (RFC 3164 and RFC 5424-5426) are fully supported by nxlog in addition to XML, JSON, CSV, GELF, and other custom formats. A key concept in nxlog is to be able to handle and preserve structured logs so there is no need to convert everything to syslog and then parse these logs again at the other side. It has powerful message filtering, log rewrite, and conversion capabilities. Using a lightweight, modular, and multi-threaded architecture which can scale, nxlog can process hundreds of thousands of events per second.
Release Notes: The code can now be compiled for Android. SNARE Syslog format support has been added for output. The im_mseventlog module can now produce output in UTF-8 and its error handling was enhanced to be more fault tolerant against the EventLog subsystem's failures. The im_mseventlog and im_msvistalog modules now set the AccountType and Category fields. A ReadFromLast configuration directive was added for the im_mseventlog and im_file modules.
jGnash is a personal finance application written in Java. Java 7 is required. jGnash supports several account types, including investment accounts. It has support for split transactions, nested accounts, scheduled transactions, commodities, and currencies. It can import OFX and QIF files, excluding investment accounts and transactions. Data is stored in an XML format so it is easy to manipulate and read the data external to the program. jGnash also has scripting support to add custom reports and functionality.
Release Notes: This release contains minor fixes and performance improvements for the budget interface.
Bokken is a GUI for the Pyew and Radare2 projects. It provides an interface to almost all the features of Pyew, and many in radare2. It's intended to be a multi-architecture disassembler and binary analysis tool, and maybe some day an alternative for commercial alternatives as IDA Pro. Currently, Bokken is neither a hexadecimal editor nor a full featured disassembler, so it should not be used for deep code analysis or for modifying files.
Release Notes: A symlink vulnerability attack in /tmp was fixed. The top menu bar was replaced with a button. This will ease integration of Bokken in Inguma. Some usability bugs were fixed along with some crashes on both Linux and Windows 7. Bokken is now more stable when running from a system-wide installation, like a standard Debian package.
Jease is a Java-based CMS. Jease means "Java with Ease", so Jease promises to keep simple things simple and hard things (j)easy. It is easy to install: all you need is Java, and you are up and running in a minute. It has a user-friendly desktop-like interface with full AJAX support. It is easy to extend: develop your designs or content types with just a few lines of Java and HTML.
Release Notes: Page to PDF conversion, improved security, better support for multi-language sites, and automatic removal of temporary files.
Alaya is a primitive chrooting Web server with basic WebDAV support. It can serve HTTPS and HTTP, and can authenticate using PAM, /etc/shadow, /etc/passwd, or using its own authentication files that allow for 'native' users that only have access to alaya content. It's intended to be a simple method of sharing content over WebDAV, and though it can be configured with a config file, it's easy to configure by command-line switches alone. Alaya always chroots to ensure that malicious users can't use '..' within a URL to access unintended documents, and that users can't accidentally leave documents in places outside of the chroot. It has a 'ChHome' mode that chroots users into their home directory and serves content from there. It supports .cgi scripts out of a trusted path (so not from within the chrooted WebDAV share) and read-only shared directories that are outside of the chroot (allowing access to shared content when in ChHome mode).
Release Notes: The 'Realm' for HTTP authentication now defaults to the hostname and can be set via the command line and config file. The makefile was changed to support compilation on systems with old SSL libraries.
libeasyfc aims to provide an easy interface to generate fontconfig configurations for alias mapping per language.
Release Notes: This release contains bugfixes.
Vrapper is an Eclipse plugin which acts as a wrapper for Eclipse text editors to provide a Vim-like input scheme for moving around and editing text. Unlike other plugins which embed Vim in Eclipse, Vrapper imitates the behavior of Vim while still using whatever editor you have opened in the workbench. The goal is to have the comfort and ease which comes with the different modes, complex commands, and count/operator/motion combinations which are the key features behind editing with Vim, while preserving the powerful features of the different Eclipse text editors, like code generation and refactoring.
Release Notes: A :wa[ll] command was added for writing all dirty editors. Search results can now be used as text motions. c/<pattern>, d/<pattern>, y/<pattern>, and v/<pattern> were added. VisualMode is now selected on mouse select. A 'za' operation was added for toggling fold open/close. A key binding was added for 'z<CR>' (same operation as 'zt'). A configurable 'imdisable' option disable Input Method when exiting insert mode (useful on Japanese keyboards). Optional vrapper plugins were added for CDT, JDT, and Surround.vim.
Andy's PHP Knowledgebase is a database-driven knowledge base management system. It features bookmark friendly URLs, easy search with browsing with article tags, article submission, and a professional and attractive interface. It is intended to be used to store, manage, and update article content for a knowledge base, but is very customizable and enables any number of creative uses.
Release Notes: This release includes security and HTML fixes as well as improvements to the email 2 article feature.
GOZERBOT is a channel bot that aids conversation in IRC channels and Jabber conference rooms. It's mainly used to serve RSS feeds and to have custom commands made for the channel. More then just a channel bot, GOZERBOT aims to provide a platform for the user to program his own bot and make it into something useful. This is done with a plugin structure that makes it easy to program your own. There are over 100 plugins already written and ready for use.
Release Notes: Bugs were fixed and the documentation was updated.
spideyfs is a FUSE filesystem over HTTP with a mini PHP interface on the server side.
Release Notes: Both reading and writing now use base64.
Simple Groupware is a complete enterprise application offering email, calendaring, contacts, tasks, document management, synchronization with cell phones and Outlook, full-text search, and much more. Simple Groupware combines standards like RSS, iCalendar, vCard, IMAP, POP3, SMTP, CIFS, CSV, WebDAV, LDAP, and SyncML under one platform. Unlike other groupware software, Simple Groupware contains the programming language sgsML to enable the quick customization and creation of powerful Web applications.
Release Notes: Some smaller fixes have been applied.
OpenDNSSEC is software that manages the security of domain names on the Internet. The project intends to drive adoption of Domain Name System Security Extensions (DNSSEC) to further enhance Internet security.
Release Notes: This release adds bugfixes. Auditor now includes the zone name in the log. ldns 1.6.12 is required. ods-ksmutil suppresses database connection information when no -v flag is given. ods-enforcerd stops multiple instances of the enforcer from running. ods-ksmutil's "zone delete" renames the signconf file, so if the zone is put back, the signer will not pick up the old file. Signer Engine's verbosity can now be set via conf.xml (the default is 3).